This page provides a list of errors and performance-related issues in the current version of STAAD.Pro after it was released. For such issues in prior versions of the program, please see the ReadMe document delivered with the STAAD.Pro installation.
| Issue ID # | Description | Extent of Impact | Workaround |
| 5135 | Accidental torsion moments are reported as zero for the ELFP method for seismic codes such as IBC, UBC, IS1893, etc. | Analysis results for those load cases, and, steel and concrete design that are based on those results. | At this point the only workaround is to use the command PERFORM ANALYSIS PRINT LOAD DATA in the input data which would print the shears at each level of the structure. The shears will be printed as part of the analysis output file. One can then manually calculate the accidental torsion moments and then apply these manually. |
| 5102 | STAAD.Pro crashes when a model referencing EXTERNAL USER PROVIDED TABLE ( .UPT file ) is modified using the text editor mode followed by SAVE ->File->EXIT. | Files where nonstandard sections have been defined using external user table file .upt. | One needs to write the user table property data in the editor itself as opposed to referring to the external upt file. Section 5.19 of the Technical Reference Manual describes how each section type can be defined. |
| 5011* | Beta angles assigned using the Assign To Edit List option is not being saved | Beta angles entered through Assign to Edit List option are not being recorded as part of the input command file even though the GUI apparently shows the assignment to work. Even already existing beta angle entries may get deleted when this option is used. | Use the options "Assign to Selected Beam" or "Use Cursor to Assign" to assign the beta angles and the feature should work as expected |
| 5209 | I had installed the latest version of Staad.Pro V8i (SELECTseries 5); I recently installed STAAD.foundation Advanced version 07.00.00.52. Now, when I run STAAD.Pro, I get a prompt "Unable to activate RSS Feed connection." How can I fix this? RSS feed from STAAD.foundation Advanced is working fine. | RSS Feed news section is not working. | Please replace the file from the link below. |
* Prior versions are also affected by this issue