Current Revision posted to RAM | STAAD Wiki by Sye on 5/24/2017 7:18:59 PM
| Applies To | |||
| Product: | STAAD.Pro | ||
| First Affected Version: | |||
| Found in Version: | 20.07.11.82 | ||
| Released in Version: | |||
| Environment: | All | ||
| Area: | Analysis/Post Processing | ||
| Subarea: | |||
| Issue #: | 665837 |
Problem Description
The MX values computed by STAAD.Pro at intermediate section locations are incorrect. Incorrect values are being reported for MX at the intermediate section locations within the Beam Force detail table and this in turn results in incorrect plots for MX. The values reported at the start and end sections are correct.
Workaround
None
Solution
The issue will be addressed in STAAD.Pro CE release planned for July 2017
See Also
Tags: MX, 20.07.11.82, 665837, Known Issues