Current Revision posted to RAM | STAAD Wiki by Sye on 12/1/2016 1:03:27 AM
| Applies To | |||
| Product: | STAAD.Pro | ||
| First Affected Version: | 20.07.11.33 | ||
| Found in Version: | 20.07.11.33 | ||
| Released in Version: | 20.07.11.50 | ||
| Environment: | All | ||
| Area: | Modeling | ||
| Subarea: | N/A | ||
| Issue #: | 264569, 336157 |
Problem Description
Inclined members are not being split through Geometry > Intersect Selected Members > Intersect.
Steps to Reproduce
- Select two inclined members which intersect each other.
- Go to Geometry > Intersect Selected Members > Intersect> OK
Note that the members are not split at the intersection.
.
Workaround
1. Open the program and go to configuration
2. Set the base unit as English.
3. Open the model and go to the top menu option View > Options > Tolerance
4. Set it to 0.1 inch and click on Apply > Ok
5. Select the members and try to intersect them by going to Geometry > Intersect Selected Members > Intersect. Enter a tolerance of 0.1 inch.
Solution
The issue is addressed in 20.07.11.50
See Also
Tags: 20.07.11.50, STAAD.Pro, First 20.07.11.33, intersect, known issue, defect, Intersect Selected Members