Current Revision posted to RAM | STAAD Wiki by Sye on 11/24/2016 1:17:21 AM
| Applies To | |||
| Product: | STAAD.Pro | ||
| First Affected Version: | 20.07.11.33 | ||
| Found in Version: | 20.07.11.33 | ||
| Released in Version: | 20.07.11.50 | ||
| Environment: | All | ||
| Area: | Post procesing | ||
| Subarea: | N/A | ||
| Issue #: | 319346 |
Problem Description
There is an error in plotting of the axial force diagram (FX) for TRUSS members. Wedges are formed at the ends instead of a uniform plot. The values are correctly computed in the analysis..
Steps to Reproduce
- Open example 1. (X:\SProV8i SS6\STAAD\Examp\us\examp01.std)
- Run the analysis. Go to post processing - Beam - Forces page.
- Select member 20 which is a truss member and display just that member in the view
- Switch on the axial force diagram.
Instead of the plot being a constant value along the length of the member, it is shown as two wedges at each end.
The same error also exists in the plot of FX in the Beam-Graphs page.
.
Workaround
None
Solution
The issue is addressed in 20.07.11.50
See Also
Tags: 20.07.11.50, STAAD.Pro, Axial, First 20.07.11.33, Axial force diagram, FX, known issue, FX plot, defect