Current Revision posted to RAM | STAAD Wiki by Sye on 5/26/2016 8:41:16 PM
| Applies To | |||
| Product(s): | STAAD.Pro | ||
| Version(s): | ALL | ||
| Environment: | ALL | ||
| Area: | Modeling | ||
| Subarea: | |||
| Original Author: | Sye Chakraborty, Bentley Technical Support Group | ||
I am not able to copy a member or do a translational repeat. What could be the reason ?
These problems usually can happen when the tolerance settings are not appropriate. Go to the top menu and choose View > Options > Tolerance and ensure that the tolerance is not set to 0 or to a very high value. It is Ok to use a tolerance of 0.1 inch for English units and 0.001m for Metric units. Click on Apply and OK and try the copy or translational repeat and this time it should work fine.
Tags: tolerance, not able to copy, unable to copy, translational repeat, copy does not work