Current Revision posted to Structural Analysis Wiki by Seth Guthrie on 3/3/2016 11:46:34 PM
| Applies To | |||
| Product: | Ram Connection | ||
| First Affected Version: | 11.00.00.164 | ||
| Found in Version: | 11.00.00.177 | ||
| Fixed in Version: | |||
| Environment: | All | ||
| Area: | Graphics | ||
| Subarea: | N/A | ||
| Issue #: | 368974 |
Problem Description
In the 3D graphic (and in the bolt gage) the double angles connecting the gusset to the column are shown with 1/4" gap spacing regardless the thickness of the gusset.
Reason
It's a bit complicated because the gusset plate above and below the beam could be different thickness meaning that the larger plate thickness would govern (and shims could be required).
Solution
To be fixed in the next release.
Tags: graphics, RAM Connection, known issue