Revision 5 posted to Structural Analysis and Design - Wiki by Seth Guthrie on 10/16/2015 11:07:16 PM
| Applies To | |||
| Product(s): | RAM Steel | ||
| Version(s): | 14.06.01.00 | ||
| Environment: | N\A | ||
| Area: | ISM export of reactions from RAM Manager | ||
| Subarea: | Typical Floor Type Usage | ||
| Defect Number: | RAM DevTrack 4038 | ||
| Original Author: | Steve Crabtree, Bentley Technical Support Group |
Defect Description
Beam End Reactions are not being exported to the ISM repository when typical floor types are used for multiple stories in RAM Modeler.
Steps to Reproduce
- Create a model in RAM Structural System using typical floor types for multiple stories in RAM Modeler
- Use the Create ISM Repository command from the File menu in RAM Manager
- In Structural Synchronizer check the beam properties for one of the beams created from a typical floor type in the RAM model. There will be no reactions listed.
Solution
This problem was fixed in Ram Structural System CONNECT Edition (version 15.0). The solution below applies to version 14.6 and 14.7.
After creating the repository re-run the RAM SS model through the various design module and then use the Update Repository command in RAM Manager to update the newly created repository. The beams created from typical floor types will be update with the reaction data.
Alternatively, create unique level types for each story initially.
Tags: GENERAL, 14.06.01.00, RAM, ISM, SELECTsupport, RAM Steel