Current Revision posted to RAM | STAAD Wiki by Seth Guthrie on 3/25/2021 8:38:16 PM
| Applies To | |||
| Product: | Ram SBeam | ||
| First Affected Version: | 5.02 (w/ RAM SS 16, Ram Elements 15 or greater) | ||
| Found in Version: | 6.00.00.33 | ||
| Released in Version: | |||
| Area: | Installation, Import/Export | ||
| Issue #(TFS): | 1115404 |
Problem Description
The link to RAM SBeam available in Ram Steel Beam (Process - Export to SBeam) and the link from Ram Elements (File - Export - RAM SBeam) do not work with CONNECT Editions. The warning indicates that SBeam is not installed .
Cannot Export
---------------------------
This features requires RAM SBeam Version 4.0 or Higher to be installed
---------------------------
Even with RAM SBeam 6.0 installed and working stand-alone.
Solution
Ram SBeam 6.0 can be used stand-alone, but the span and loads cannot be imported at this time. We expect this to be resolved with an updated 64 bit Connect Edition of SBeam, version 7.0.
See Also
[[SBeam Crashes during design with Ram SS 17.02]]
Tags: Import/Export, RAM Elements, RAM SBeam, RAM Structural System, known issue