Current Revision posted to RAM | STAAD | OpenTower Wiki by Sye on 1/28/2021 5:32:43 PM
| Applies To | |||
| Product(s): | STAAD.Pro | ||
| Version(s): | ALL | ||
| Environment: | ALL | ||
| Area: | Analysis | ||
| Subarea: | Direct Analysis | ||
| Original Author: | Sye Chakraborty, Bentley Technical Support Group | ||
Example on Direct analysis with steel design as per AISC 360-10 using STAAD.Pro
The attached example has been created to give users an idea on how to carry out Direct Analysis on a steel structure using STAAD.Pro and also how to set up the strength and serviceability envelopes and eventually carry out a steel design as per the ASIC 360-10 specification following the LRFD design approach. This is just a sample problem with a limited set of load cases mainly aimed at demonstrating how one should set up the Direct Analysis and the subsequent design process.
communities.bentley.com/.../Direct_5F00_Analysis_5F00_with_5F00_Steel_5F00_Design_5F00_Rev.std
Tags: aisc 360-10, direct analysis, Steel Design, direct analysis example, direct analysis with steel design