Current Revision posted to RAM | STAAD Wiki by Sye on 7/19/2018 11:33:37 PM
| Applies To | |||
| Product(s): | STAAD Foundation Advanced | ||
| Version(s): | ALL | ||
| Environment: | ALL | ||
| Area: | General | ||
| Subarea: | N/A | ||
| Original Author: | Sye Chakraborty, Bentley Technical Support Group | ||
I have got a large number of load cases and combinations in my STAAD Foundation Advanced model. Is there a way for me to quickly set the Load Case Type data to Service and Ultimate for these load cases and combinations
In STAAD Foundation Advanced Connect Edition Update 2 ( 8.2.0.30) and up, you can easily set the Load Case Type for a batch of load cases or combinations.
The process is listed below
- Select the load cases or combinations. You may use SHFT + mouse click or CTRL + mouse click to select the cases.
- With multiple load cases ( or load combinations) selected, you will be given the option to set the Load Case Type ( or Load Combination type).
- Choose the appropriate radio button and press Batch Apply as shown in the next picture
The Load Case Type for all selected load cases ( or combinations ) will be set accordingly.
Tags: load case type, Service, Primary, batch, load combination type, ultimate