Quantcast
Channel: RAM | STAAD | ADINA Wiki
Viewing all articles
Browse latest Browse all 8748

How do I deactivate the additional modules in STAAD.Pro

$
0
0
Current Revision posted to RAM | STAAD Wiki by Payel on 1/12/2018 5:53:51 PM
  
 Applies To STAAD.Pro V8i
  
 Product(s):STAAD.Pro V8i, Select Series 6
 Version(s):20.07.10.41 and later
 Environment: All
 Area: STAAD.Pro Wiki
 Subarea: Licensing
 Original Author:Payel Sasmal
  

Problem Description

I am accidently using STAAD.Pro Advanced Analysis Engine, STAAD.beava (Bridge Codes), STAAD Planwin and RAM Connection and I’m getting invoice for the usage. Can these be deactivated within STAAD.Pro?

Solution

To avoid using STAAD.Pro Advanced Analysis Engine, STAAD.beava and Building Planner (STAAD Planwin) follow the steps as mentioned below.

For Connect Edition:

On the STAAD.pro CONNECT Edition Open screen, in the lower right corner, make sure that the check boxes are unchecked if you do not want to utilize any of the additional modules.

For V8i Version:

  • Start STAAD.Pro, in the License Configuration, uncheck the boxes next to Advanced Analysis Engine, STAAD.beava and Building Planner as shown here.

To avoid using the RAM Connection license, follow the steps as mentioned below.

  • To avoid using the RAM Connection license along with STAAD.Pro, you have to make sure that the check box "Use RAM Connection Product License" should be always unchecked as shown here. In case, you are planning to use it, you will have to check back the box.

STAAD .Pro CONNECT Edition
On the STAAD.pro CONNECT Edition Open screen, in the lower right corner, make sure that the RAM Connection box is unchecked if you do not want to utilize a RAM Connection License.

See Also

Tips for Using RAM Connection within STAAD.Pro [TN].

Tags: Advanced analysis module, Bridge Codes, STAAD.beava, RAM Connection, STAAD Planwin

Viewing all articles
Browse latest Browse all 8748

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>