Overview

This page covers the basics of using STAAD.Pro CONNECT Edition with Ram Concept for Advanced Slab Design.

Documentation

For complete documentation see STAAD.Pro Help - Contents - Design - Concrete Design - Advanced Slab Design 

Additional information is in the RAM Concept Help - Manual Chapter 15 Data Transfer from STAAD.

Data from RAM Structural System into RAM Concept

There are a few basics steps in the process.

Start with a complete concrete model with a flat concrete slab using plates. Include columns or walls and loads in the model at a minimum.

1. Analyse the model. 
2. Open the Advanced Slab Design workflow
3. Define one or more Load Envelopes in the Envelopes page
4. Define one or more concrete slabs in the Slab Design page. Be sure to include connected columns or walls that should be transferred
5. Use the Export tool to generate the .gcff file
6. Open Ram Concept and use File - Sync STAAD - New form gcff file

Here's a short video of the process. 

(Please visit the site to view this video)