Revision 1 posted to RAM | STAAD Wiki by Sye on 4/7/2017 12:49:33 AM
| Applies To | |||
| Product(s): | STAAD.Pro | ||
| Version(s): | 20.07.11.82 | ||
| Environment: | All | ||
| Area: | Steel Design | ||
| Subarea: | AISC Unified | ||
| Issue #: | 328300 |
Problem
When the CAN 1 parameter were assigned to members and these were checked for deflection as per the AISC 360-10 or AISC360-05 codes, the deflection check reported infinity as design result.
Reason
In case of CAN parameter, the x, y, z deflections were not being extracted correctly to compute the correct resultant deflection which lead to the problem
Workaround
None
Solution
Will be addressed in STAAD.Pro SS6 SP4 expected to be released in April/May of 2017.
</
Tags: Active, STAAD.Pro, 20.07.11.82, 570801, known issue, defect