| Applies To | |||
| Product: | STAAD.Pro | ||
| First Affected Version: | |||
| Found in Version: | 20.07.10.64 | ||
| Released in Version: | 20.07.11.45 | ||
| Environment: | All | ||
| Area: | Post Processing | ||
| Subarea: | N/A | ||
| Issue #: | 257167 |
Problem Description
The plots of Mz, My, Fy, Fx etc.in the Post Processing Mode > Beams -> Graph page are not displayed for the load cases or load combinations which include wind load generation.
Steps to Reproduce
1. Open and analyze a model with with load generation.
2. Go to the Beam -> Graphs tab in the postprocessing mode
3. Select any beam on the structure
4. Look at the graphs on the right hand side and notice that graphs for wind load cases do not look good as it is not scaled correctly These graphs are correctly scaled for the other primary load cases, except wind load.
5. Note that graphs for the load combinations which include any wind load case are not drawn at all.
.
Workaround
The diagrams can be seen in the graphics window by turning on the display icons for these items from the toolbar or one can double click on the individual members and go to the Shear Bending Tab inside the Member Query dialog box to see the diagrams.
Solution
The issue is addressed in 20.07.11.45.
See Also
