| Applies To | |||
| Product(s): | RAM Connection | ||
| Version(s): | 9.1.0.101 | ||
| Environment: | N/A | ||
| Area: | N/A | ||
| Subarea: | N/A | ||
| Original Author: | Bentley Technical Support Group | ||
Problem Description
In the design report for base plates with anchors, near the end of the report is a section called "Max compression and tension" - "Base plate Anchors tension" with a graphic and a legend summarizing the anchor forces.
The color legend on this graphic is reversed, blue should be at the bottom, and dark red should be at the top.
The values for anchor tension and the columns of the anchor circles is correct only if the legend is flipped.
Solution
Use the table of anchor tension value instead.
Optionally invert the color legend on the Word exported version of the output.
We expect the problem to be fixed with the next update.
See Also
Structural Product TechNotes And FAQs
Comments or Corrections?
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!