Current Revision posted to Structural Analysis and Design Wiki by SteveCrabtree on 7/23/2013 8:19:56 PM
Modeling a Sloping Deck TN
BIM,RAMStructuralSystem,Revit,export,import,RAM-RevitLink
| AppliesTo | |||
| Product(s): | RAMRevitLink | ||
| Version(s): | ALL | ||
| Environment: | N/A | ||
| Area: | Import/Export | ||
| Subarea: | |||
| OriginalAuthor: | BentleyTechnicalSupportGroup | ||
Modeling Sloping Deck TN
Open the Roof plan view.
Select the Home tab and then the Floor icon.
Once you have selected the Floor icon the Draw panel will be visible. Pick the Slope Arrow icon.
Pick two endpoints on a beam in the slope of the roof.
Right click on the Slope Arrow and select Element Properties.
In the properties dialog set the Height Offset at Tail and Head to the desired elevations.
On the draw panel select the Add Sketch Lines icon with the picture of the beam and deck. Pick each of the perimeter beams that outline the area of the deck. (You could also pick one of the other draw tools to define the deck area.)
Click the Finish Floor button to complete the command.
