RAM Structural System Revit Link
The RAM Structural System offers true interoperability with the Revit© Structure Link, part of Bentley's iWare Apps for Interoperability. Bi-directional integration between the RAM Structural System (RSS) and Autodesk® Revit® Structure enables you to analyze and design buildings within the RSS environment and subsequently use Revit Structure for multi-discipline collaboration as well as documentation.
Latest News
- An updated and enhance version of the RAM - Revit Link, v5.0, is now available. This version includes some powerful enhancements, error corrections making it more robust and reliable, and adds compatibility with Revit 2013 and Revit Ultimate 2013.
- Best practices on interoperability between the RAM Structural System and Autodesk Revit Structure were discussed in our free one-hour eSeminar titled "Latest Developements in the RAM Structural System - Revit link". If you missed it, a recording of the eSeminar is now available on the Bentley website. Additionally, you can read the Question and Answers from our recent [[RAM - Revit Link v4 eSeminar]].
- You may also be interested in using the ISM Plug-in for Revit, which allows expanded features such as data exchange with a wide variety of structural analysis, design, drafting, and detailing programs as well as revision history. Revit versions 2010 and 2011-both 32-bit and 64-bit, are supported. Bentley's Structural Synchronizer (free download) is also required. You can download both these applications from Bentley's iWare Apps page.
Download
![Download Here]()
Get the RAM Structural System Revit Link
Just released...v05.00.00 of the RAM Structural - Revit Link. Download RAM-Revit Link from Bentley's iWare Apps page (free SELECT account required). Compatible with Revit 2013 and Revit Ultimate 2013, as well as earlier versions, Revit 2010 through Revit 2012. Supports both 32bit and a 64bit versions of Revit.
Release Notes
RAM Revt Link Release Notes are also available with version history.
Disclaimer
The software and related documentation, including this documentation, are protected by both United States copyright law and international treaty provisions. Any unauthorized copying or reproduction is strictly prohibited and subject to civil and criminal penalties. Please refer to the License Agreement for authorization to make a backup copy of the software. You may not sell this software or documentation or give copies of them away to anyone else.
Except as expressly warranted in the License Agreement, RAM International disclaims all warranties, expressed or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose, with respect to the software, the accompanying written materials, and any accompanying hardware. All results should be verified to the user's satisfaction. The contents of these written materials may include technical inaccuracies or typographical errors and may be revised without prior notice.
Table of Contents
- Introduction
- Starting a Model in RAM Structural System
- Starting a Model in Revit Structure
- Introduction
- Revit Structure
- Exporting to RAM Structural System
- Inside RAM Structural System
- Importing Changes back to Revit Structure
- Re-exporting to RAM Model
- Introduction
- Starting in Revit Structure
- Start Modeling in RAM Structural System
Recroded Seminar on the RAM - Revit Link v4.0 (2012-02-28) and corresponding Q&A log
Recorded Seminar on the RAM - Revit Link v3.0
Recorded Seminar on the RAM - Revit Link v2.0 (2008-02-13) and corresonding Q&A log
RAM-Revit Link Tips And Tricks
These tips and tricks represent solutions to common issues users have asked us about.
If you have questions, please ask them at the Analysis & Design Forum here on Be Communities. Alternately, you may also send them to Bentley Technical Support. If you have determined a solution to a RAM Revit Link problem you'd like to share, please post them on this wiki page.
Note: You must be a registered user and logged in to add information on this page.
- [[Can't Make Joist Error]]
- [[Change Reaction Mark]]
- [[Editing Revit Joist Families]]
- [[Enhanced Deck Mapping]]
- [[Export Error - Method Not Found]]
- [[Mapping Floor Types]]
- [[Mapping RAM "Other" Material TN]]
- [[Modeling a Sloping Deck]]
- [[RAM Modeling - Use One Floor Type Per Level]]
- [[Remove Camber Inch Mark Symbol]]
- [[Reset RSS Origin]]
- [[Revit Link Coordinate Mapping]]
- [[Stud Count Bracket Options]]
Autodesk and Revit are registered trademarks of Autodesk, Inc. This website is independent of Autodesk, Inc.